Liquid to gas Plate Heat Exchanger

1. For the heat exchange of liquid to liquid and liquid to gas 2. High heat exchange efficiency 3. Little heat loss

Plate heat exchanger is the ideal equipment for heat exchange of liquid to liquid, or liquid to steam. And it is featured by high efficiency, small heat waste, compact and light construction, small floor space, convenience to install and clean, wide range of application, long service life and so on.

In the situation of same pressure loss, its heat transfer coefficient is 3-5 times higher than that of tubular heat exchanger, and with the floor space 1/3. Its heat recovery rate is up to above 90%.

 

Plate heat exchanger is widely used in metallurgy, petroleum, chemical industry, food, pharmacy, shipping, textile, papermaking and so on. It is really a good equipment for heating, cooling, heat recovery and fast sterilization.

Main technology parameters

Specification	BR 0.05	BR 0.1	BR 0.2
Monolithic heat transfer area (2)	0.05	0.1	0.2
Slab size( mm)	500¡Á168	660¡Á250	970¡Á330
Slab thickness(mm)	0.8	0.8	0.8
Angle hole dia(mm)	38	60	75
Pipe fittings dia(mm)	28	38	46
Corrugation shape	Herringbone corrugation
Corrugation spacing  (mm)	10	12	12
Average board Spacing (mm)	3.8	4.2	4.2
Combined heat exchanger area(2)	0.5~5	4~10	10~38
Maximum working Pressure (mpa)	0.4~2
Upper limiter of working temperature  (c)	Commonly about 120~160c ,Particularly can be 250c
heat transfer coefficient (W/m2 c)	2000~6000

 

Liquid to gas Plate Heat Exchanger